Smart Meters typically emit radio frequency microwave radiation in all directions. To protect your loved ones from these emissions, your shield must be placed between the source of emissions and the people. That usually means on the interior of the wall where the smart meter is attached. But what if you need to shield an outdoor patio? Or an area to the side of the smart meter?
Now you can. The Economy Exterior Smart Meter Shield Kit includes everything you need and requires no tools (except a scissors) to install. Installation takes only seconds. Corrosion-immune, soft Stainless Steel Mesh is wrapped around the glass part of the smart meter and is held in place by weather resistant, adhesive Velcro®-type hook and loop. Simply trim any excess with your scissors. Couldn’t be easier! Shielding performance reduces sideways signal measurably, but still allows enough to get back to the utility for proper meter readings. Dimensions: 20 inches x 6 inches approx.
This kit comprises everything you need to shield your smart meter both indoors and outdoors. To shield effectively place the shield between the source of radiation (in this case the smart meter) and that that you wish to protect. Avoid shielding which reflects radiation back towards your home. This kit, you get everything you’ll need to set up a simple but effective RF shield for an ample area of 8x7 feet and includes an RF reflector, an absorber material, mounting tape and ground cord (comes with instructions). With these 2 layers, almost no radiation will get through and this is easily demonstrated by taking readings with an RF meter. Clear instructions show you how to attach it to the interior of the wall on which the smart meter is mounted. You can cover it with any decorative finish you like. Great for both long term or short term (removable) situations. Your smart meter is pulsing out microwaves right now. Shield yours today! Includes Economy Exterior Smart Meter Shield Kit for outdoor protection too!
Shield your home or any other space with this Y-shield EMF shielding paint (XL format) which will reduce up to 99% of the radio frequency radiation exposures.
Hhighly effective up to 18 GHz.10% of the shielding is due to the absorption of the radiation by the carbon in the Y-Shield paint.
Can be used for interior or exterior application (Walls, Ceilings, Doors, etc) on:
Ready to use right out of the tin
Only in black
Attenuation: typically 30 dB per layer
Resistivity: ~10Â Ohm per sq
Minimum application temperature: +1°C / 33.8°F
Weight: 3.2 lb /liter
Typical coverage: 50-100 ft² (~ 5-10 m²) per liter
VOC content 0,2 g/l
Shelf Life: 15 months, unopended
*** Sold by 1 liter pail also***
Because this product does NOT carry a UL listing some electrical inspectors, can require the homeowner to hire an electrical engineer to certify that the product is safe to connect to your electrical ground. It may be required that a licensed electrician perform the ground connection. If your application requires an electrical inspection AFTER installation, check with your local inspector BEFORE you shield.