Lloyd-Burrell-photo-768x228-1.jpg

Reclaim Your Energy Edge

Listen to this interview until the timer below say's zero. To listen by telephone: Dial: 206-402-0103 Replay ID: 130-514-547#. If you are having trouble accessing the interview click here.

The interview starts when the timer on this page reaches zero – you will be able to listen for FREE for 48 hours. Can't see the timer? Click here.

The FREE replay period for the full version of this interview expires when the timer on this page reaches zero. See below for an extract.

laura frontiero
Laura Frontiero

7-Minute Excerpted Video Interview

Listen to my interview with Laura Frontiero, and:

  • What the ‘energy edge’ is, how you can get it. (and how your mitochondria is a big part of this) 
  • How toxins (such as EMFs) damage your mitochondria, cause dysfunction, disease, and what you can do to fix it 
  • 9-steps to support your mitochondrial function and restore your health (really practical tips & most of them are F-REE)  
  • One of the most dangerous places you can be (hotbeds for EMFs) 
  • How is your mitochondria doing? Laura’s functional test lab can tell you what you are deficient in and how are your mitochondria struggling 
  • The missing piece in traditional medicine – ‘early detection is not prevention’ 
  • How one of the most important things you can do to restore your mitochondrial function is totally F-REE

Disclaimer: All rights reserved. No part of this material may be reproduced or transmitted for resale or for use by any other party. All other reproduction or transmission, in any form or by any means, electronic or mechanical, including photocopying, recording, or by any informational storage or retrieval system, is prohibited without express written permission from the Publisher. The ideas, procedures, and suggestions contained in this material are not intended to replace a one ­on ­one relationship with a qualified healthcare professional and are not intended as medical advice. Always consult a knowledgeable medical professional about your symptoms. It is advised that you make your own health care decisions based upon your research and in partnership with a qualified healthcare professional.

FAQs

The FM5 meter measures in micro watts per meter squared and sensitivity is down to 1 micro watt per meter squared.

Lower frequency module frequency range 1 MHz to 10 Ghz
Low freq. sensitivity 1uW/m2 to >100k uW/m2
High frequency range 24 GHz to 32 Ghz.
High freq. sensitivity 30uW/m2 to >100k uW/m2.
Audio range 40Hz to 16kHz.
Power draw approx. 50mA on low freq. module.
Approx. 200mA on high freq. module.
Power source: 9V battery, battery life is dependent on battery quality but more so which module you use; the mm wave module is 400% more battery hungry than the low frequency module.

We currently do not have the exact specs on accuracy but it should be comparable with other RF meters on the market between +\- 3dB to +/- 8dB. I realize that is quite a range but until we know specifics from the manufacturer we can't really confirm that info yet. We have asked the manufacturer about specifics and are waiting on lab testing. We will update the website when we have more information.

The meter has two test settings. One is 40 MHz-10GHz and the other is 24GHz-32GHz. Future antenna upgrades are going to be available and they are already working on a 38-42 GHz range and a 60GHz antenna based on what technology is being rolled out and what the need is to test various frequency ranges. When future antenna upgrades are released the meter can be sent to the manufacturer for a different antenna frequency range upgrade

The retail price of the FM5 meter is $999.99 and with the code ELECTRICSENSE50, you receive $50 off. We are taking pre-orders for this new meter that will be arriving sometime in September, and the first 50 people that order get free world-wide shipping.
Please take the time to read the information about the meter. There are many different meters that measure various types of EMFs, so this may or may not fit your needs.

I’d really love to own the meter from the video… As I have been scammed in the past, I don't use Paypal or other card processors, can you process my VISA card directly for the full amount with the $50 discount using code electricsense50?
The FM5 meter only measures wireless frequencies. You would need a different type of meter to measure dirty electricity. We recommend the 2 different meters below to test dirty electricity. Stetzerizer Microsurge Meter- Inexpensive meter for measuring dirty electricity. Has a different frequency range than the Line EMI meter. Ideally you should use both or the picture is incomplete about what's going on with the dirty electricity in the home. Line EMI meter- Has a sound function. Picks up a different frequency range than the Stetzerizer. Should be used in addition to the Stetzerizer to get a complete picture of the DE situation in the home.
The meter can give peace of mind and help change habits to lower your exposure levels. Often there are places that are worse (or places where you might feel worse and suspect various frequency exposures.) Testing is the only reliable way to determine what actions can help. Additionally, much comes from devices in the home and more devices will use these frequencies in the future. The meter helps to determine what you can do about what you can control and also to change habits to avoid extreme exposures in situations that are more difficult to avoid.
The lower frequency range from 1MHz to 10GHz can be used for detecting WiFi which is in the 2.4GHz or 5GHz frequency bands. Bluetooth operates at 2.4GHz. Many of the 3G, 4G and even 5G network frequencies are found in this lower frequency range. T-Mobile has been using frequency bands in the 600-700MHz range for their 5G networks. Verizon uses a 700MHz band in this range. Verizon has recently acquired additional “mid-band” frequencies between 1GHz to 7GHz. The meter's high frequency range of 24GHz to 32GHz can be used to detect millimeter waves, such as T-Mobile's Band n258 which operates at 24GHz and Band n261 which operates at 28GHz. Verizon holds the majority of licenses in the 27.5-28.35GHz range. Satellite services like Starlink, will be using a variety of frequency bands as well. The meter has two test settings. One is 40MHz-10GHz and the other is 24GHz-32GHz. Future antenna upgrades are going to be available and they are already working on a 38-42 GHz range and a 60GHz antenna based on what technology is being rolled out and what the need is to test various frequency ranges.

For 24/7 access to all EMF interviews click here.

Affiliate disclosure: ElectricSense participates in affiliate programs with other websites and earns commissions from purchases made via those links.