Magnetic Shielding Film – Giron

(Part. #NET273)

Giron

GIRON Magnetic Shielding Film, which does not contain Nickel, is unlike any other magnetic shielding material available on the market today. Suitable for high field strength applications requiring high saturation and good permeability, it is both thin and strong, and unlike Mu-metal™ it is very tolerant to bending or shaping without losing its shielding properties.

GIRON best magnet shielding GIRON is a woven, laminated material. Cuts neatly with snips or sheet metal tools, and can be used either flat or molded into shapes for best performance.

Suitable for small shields on magnets, motors, speakers and appliances such as refrigerators, vacuum cleaners etc. Also great for lining car floor or firewall. Perfect for full or partial wall / floor shielding in rooms too! Can be glued, taped, nailed, screwed or riveted into place. Could even be used to make a (heavy weight) vest to shield a person's torso! Works with AC or DC magnetic fields (0-1000 Hz), and will tolerate temperatures from 32° to 140°F. Laminated with a 0.005 inch glass reinforced polypropylene tape which is UV sensitive, cover if installation is exposed to direct sunlight.
GIRON most effective magnetic shield

  • Initial permeability: 500
  • Relative permeability: 7000
  • Saturation induction: 2,0 T
  • Curie Temp.: 740°C (1364°F)
  • Weight is approx 1 lb per square foot

25.5 inch wide, 1 mm thick. Weighs 3.5 Kg/m² (about 15 pounds per 10 foot length). Edges are sharp.

Return Policy: For return policy check here.

Questions?: If you have a question about any of the items on this page email support: sarah [at] electricsense101.com

Pin It on Pinterest